The
Haas HA5C series is the ideal choice for holding smaller parts. Clamp parts using standard 5C collets, or chuck them by threading
a 3-jaw chuck to the 2 3/16"-10" spindle nose. Easy to program, interface and set up, the HA5C is the industry benchmark for
quality, accuracy and dependability.
The Haas HRT 160 of horizontal/vertical
T-slotted rotary table.
Platter Size 160mm/6.299" with
a weight capacity of 45 lbs unsupported - 180 lbs when supported by a tailstock.
If
versatility in workholding is important, the Haas A1-5 spindle rotary table is the way to go. Chucks, faceplates and collet
chucks can easily be mounted to a standard A1 spindle nose. Platter weight capacity of 45 lbs unsupported - 180 lbs when supported
by a tailstock.
The
new HRT SPSeries gives you the same features and benefits as the standard HRT series, but with the motor wrapped behind the
table to give a substantially shorter overall length. Platter Size 160mm/6.299" with a weight capacity of 45 lbs unsupported
- 180 lbs when supported by a tailstock.
The Haas HRT 210 of horizontal/vertical
T-slotted rotary table.
Platter Size 210mm/8.268" with
a weight capacity of 82.5 lbs unsupported - 330 lbs when supported by a tailstock.
If versatility in workholding
is important, the Haas A1-6 spindle rotary table is the way to go. Chucks, faceplates and collet chucks can easily be mounted
to a standard A1 spindle nose. For small parts, we have a 5C collet chuck (A6 5C) and 16 C collet chuck (A616C) that work
with the A6 AC draw bar.
Platter weight capacity of 82.5
lbs unsupported - 330 lbs when supported by a tailstock.
The new HRT SPSeries gives you
the same features and benefits as the standard HRT series, but with the motor wrapped behind the table to give a substantially
shorter overall length.
Platter Size 210mm/8.268" with a weight capacity
of 82.5 lbs unsupported - 330 lbs when supported by a tailstock.
For
holding and rotating medium-sized parts or fixtures at speeds of up to 130¡/sec, the Haas HRT 210HS horizontal/vertical T-slotted
rotary table is the answer. Capable of rotating and indexing parts and fixtures at 130¡/sec (Standard HRT-210 rated at 60¡/sec)
the HRT 210HS one of the latest production-enhancing models offered by Haas Automation. This rugged heavy-duty table features
an 8.27" (210 mm) platter that can hold parts and fixtures up to 165 pounds. Chucks and fixtures can be easily bolted to the
table using the six machined T-slots. The 2.0" (50.8 mm) thru-hole allows for bar feeding and special fixture locating requirements.
Haas
obtains the most cost-effective multi-spindle designs on the market by spacing heads as close together as possible. In higher
volume applications, loading multiple parts saves tool changing and rapid-movement times, allowing your machine to run longer
between part loadings adding up to substantially increased profits.
The
HA2TS is a self-contained setup of two HA5Cs and two pneumatic tailstocks mounted on a subplate. The tailstocks adjust to
the length of your parts by sliding on T-slots. The minimum distance from HA5C to tailstock when the spindle is extended is
2.30", while the maximum distance is 12". The distance between centers is 5".
Solicitan Cotizacion AQUI
